Corolla L4-2.4L (2AZ-FE) (2010)
/Page-1471007.png)
Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
22. INSTALL REAR WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. INSPECT REAR WHEEL ALIGNMENT
See: Maintenance/Alignment/Service and Repair
25. CHECK FOR SPEED SENSOR SIGNAL
without VSC See: Testing and Inspection/Scan Tool Testing and Procedures/ABS (Antilock Brake System)/Test Mode Procedure
with VSC See: Testing and Inspection/Scan Tool Testing and Procedures/Vehicle Stability Control System/Test Mode Procedure
