Corolla L4-2.4L (2AZ-FE) (2010)
(c) Using a union nut wrench (10 mm), disconnect the brake line while holding the rear flexible hose with a wrench.
NOTICE:
*
Do not kink or damage the brake line.
*
Do not allow any foreign matter such as dirt and dust to enter the brake line.
(d) Remove the clip and rear flexible hose.
Installation
BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: INSTALLATION
NOTICE:
*
Because the left and right rear flexible hoses are not interchangeable, verify the part number when installing the flexible hoses.
*
If the hoses are to be reused, connect them after checking the identification marks placed when each hose was disconnected.
1. INSTALL REAR FLEXIBLE HOSE (for Drum Type)
(a) Install the rear flexible hose with 2 new clips.