Corolla L4-2.4L (2AZ-FE) (2010)
and Repair/Removal and Replacement/Removal
12. REMOVE UPPER RADIATOR SUPPORT
(a) Remove the 2 bolts and 2 upper radiator supports.
(b) Remove the 2 support cushions from the 2 upper radiator supports.
13. REMOVE HOOD LOCK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Removal
14. SEPARATE WATER BY-PASS HOSE
(a) Separate the water by-pass hose from the 2 clamps.
(b) Disconnect the water by-pass hose from the radiator assembly.
15. REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY
(a) Remove the 2 bolts and hood lock support sub-assembly.
16. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
(a) Disconnect the horn connector.
(b) Remove the 4 bolts and upper radiator support sub-assembly.