Corolla L4-2.4L (2AZ-FE) (2010)
7. REMOVE NO. 2 MANIFOLD STAY
(a) Remove the bolt, nut and No. 2 manifold stay.
8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 4 bolts and No. 1 exhaust manifold heat insulator.
9. REMOVE AIR FUEL RATIO SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and Repair/Air
Fuel Ratio Sensor/Removal
10. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
(a) Remove the 5 nuts and exhaust manifold converter sub-assembly.
(b) Remove the gasket.
11. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 2 bolts and No. 2 exhaust manifold heat insulator.