Corolla L4-2.4L (2AZ-FE) (2010)
Exhaust Pipe: Service and Repair
Removal
2AZ-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL
1. REMOVE TAIL EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports.
(c) Remove the gasket from the center exhaust pipe assembly.
2. REMOVE HEATED OXYGEN SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Heated Oxygen Sensor/Removal
3. REMOVE CENTER EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts.
(b) Remove the center exhaust pipe assembly from the 2 exhaust pipe supports.
(c) Remove the gasket from the front exhaust pipe assembly.
4. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.