Toyota Workshop Service and Repair Manuals

Repair/Removal

14. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 2ZR-FE)   See: Engine, Cooling and Exhaust/Cooling

System/Radiator/Service and Repair/Removal

15. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 2AZ-FE)   See: Engine, Cooling and Exhaust/Cooling

System/Radiator/Service and Repair/Removal

16. REMOVE NO. 2 FAN SHROUD (for 2ZR-FE)   See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal

17. REMOVE NO. 2 FAN SHROUD (for 2AZ-FE)   See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal

18. REMOVE CONDENSER ASSEMBLY WITH RECEIVER

(a) Remove the condenser assembly with receiver as shown in the illustration.

Installation

HEATING / AIR CONDITIONING: CONDENSER: INSTALLATION

1. INSTALL CONDENSER ASSEMBLY WITH RECEIVER

(a) Install the condenser assembly with receiver as shown in the illustration.

HINT
If the condenser is replaced with a new one, add compressor oil to the new condenser.

Capacity:

40 cc (1.4 fl.oz.)

Compressor oil:

ND-8 or equivalent

2. INSTALL NO. 2 FAN SHROUD (for 2ZR-FE)   See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation