Corolla L4-2.4L (2AZ-FE) (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
Installation
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: INSTALLATION
1. INSTALL AIR CONDITIONING PRESSURE SENSOR
(a) Sufficiently apply compressor oil to a new air conditioning pressure sensor.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the new air conditioning pressure sensor.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(c) Connect the connector.
2. CHARGE WITH REFRIGERANT See: Service and Repair
3. WARM UP ENGINE See: Service and Repair
4. INSPECT FOR REFRIGERANT LEAK See: Service and Repair