Corolla L4-2.4L (2AZ-FE) (2010)
(a) Using a "TORX" Socket Wrench T-type T30, remove the "TORX" bolt.
(b) Disconnect the connector and remove the front door courtesy switch assembly.
Installation
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL FRONT DOOR COURTESY SWITCH ASSEMBLY
(a) Connect the connector.
(b) Using a "TORX" Socket Wrench T-type T30, install the front door courtesy switch assembly with the "TORX" bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)