Corolla L4-2.4L (2AZ-FE) (2010)
/Page-998008.png)
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Except TMC made:
(1) Disconnect the CAN No. 1 junction connector.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR - CAN NO. 2
JUNCTION CONNECTOR)
OK -- REPLACE CAN NO. 1 JUNCTION CONNECTOR
