Corolla L4-2.4L (2AZ-FE) (2010)
/Page-1088002.png)
(a) Remove the 4 bolts and the No. 1 exhaust manifold heat insulator.
2. REMOVE AIR FUEL RATIO SENSOR
(a) Disconnect the air fuel ratio sensor connector and wire harness clamp.
(b) Using SST, remove the air fuel ratio sensor.
SST : 09224-00010
Installation
2AZ-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR
(a) Using SST, install the air fuel ratio sensor.
SST : 09224-00010
