Corolla L4-2.4L (2AZ-FE) (2010)
Variable Valve Timing Actuator: Service and Repair
Installation
2AZ-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
(b) Install the camshaft timing oil control valve assembly with the bolt.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(c) Connect the camshaft timing oil control valve connector.
(d) Install the vacuum hose clamp with the bolt.
2. INSPECT FOR OIL LEAK
3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation