Corolla L4-2.4L (2AZ-FE) (2010)
NG -- INSPECT FUSE (IGN FUSE)
OK -- REPLACE ECM See: Service and Repair/Components
7. INSPECT FUSE (IGN FUSE)
(a) Remove the IGN fuse from the instrument panel junction block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reinstall the IGN fuse.
NG -- REPLACE FUSE (IGN FUSE)
OK -- Continue to next step.
8. CHECK HARNESS AND CONNECTOR (ECM - INTEGRATION RELAY)