Corolla L4-2.4L (2AZ-FE) (2010)
Seat Position Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Air Bag Systems/Service Precautions
2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
(a) Remove the front seat assembly See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual
Seat)/Removal.
3. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
(a) Remove the front seat assembly See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Removal.
4. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Overhaul/Front
Seat Assembly (for Manual Seat)/Disassembly
5. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly (for Manual Seat)/Disassembly
6. REMOVE VERTICAL ADJUSTING HANDLE (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly (for Manual Seat)/Disassembly
7. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly
(for Manual Seat)/Disassembly
8. REMOVE SEAT POSITION SENSOR (for Manual Seat)
(a) Disconnect the connector.
(b) Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.