Corolla L4-2.4L (2AZ-FE) (2010)
Hood Sensor/Switch (For Alarm): Service and Repair
Installation
THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: INSTALLATION
1. INSTALL HOOD LOCK ASSEMBLY
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.
(c) Install the hood lock assembly with the 3 bolts.
Centering Bolt - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
Standard Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
2. INSPECT HOOD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Testing and Inspection
3. ADJUST HOOD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Adjustments
4. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. INSTALL NO. 4 ENGINE UNDER COVER (for 2AZ-FE) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation