Corolla L4-2.4L (2AZ-FE) (2010)
/Page-156001.png)
Power Door Lock Switch: Testing and Inspection
Door Control Switch
DOOR LOCK: DOOR CONTROL SWITCH: INSPECTION
1. INSPECT POWER WINDOW MASTER SWITCH (for Driver Side with Power Window)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) If the result is not specified, replace power window master switch.
2. INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Driver Side without Power Window)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
