Corolla L4-2.4L (2AZ-FE) (2010)
(f) Connect the speed sensor connector.
2. INSTALL FRONT SPEED SENSOR (for TMMC, NUMMI Made)
(a) Install the front speed sensor with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 76 in-lbf)
NOTICE:
*
Prevent foreign matter from attaching to the sensor tip.
*
Do not file the sensor installation hole or surface because the gap between the magnet rotor and front speed sensor is important.
(b) Install with the clamp to the shock absorber.
(c) Temporarily install the No. 1 sensor clamp to the shock absorber.