Corolla L4-2.4L (2AZ-FE) (2010)
Fuel Gauge Sender: Service and Repair
Installation
2AZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
(a) Install the fuel sender gauge assembly by sliding it downward.
NOTICE:
Make sure that the fuel sender gauge arm does not bend.
(b) Connect the connector of the fuel sender gauge assembly.
NOTICE:
Do not damage the wire harness.
2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Install the fuel suction tube assembly with pump and gauge to the fuel tank See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Pump/Service and Repair/Removal and Replacement/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Injector/Service and Repair/Installation
4. INSPECT FOR FUEL LEAK See: Powertrain Management/Fuel Delivery and Air Induction/Testing and Inspection