Corolla L4-2.4L (2AZ-FE) (2010)
Headlamp Dimmer Switch: Service and Repair
Installation
LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION
1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
(a) Engage the claw while loosening the clamp as shown in the illustration.
(b) Install the headlight dimmer switch assembly with the clamp.
(c) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY See: Sensors and Switches - Wiper and Washer Systems/Wiper Switch/Service and
Repair/Installation
3. INSTALL SPIRAL CABLE (w/o VSC) See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair/Installation
4. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR (w/ VSC) See: Restraint Systems/Air Bag Systems/Clockspring Assembly /
Spiral Cable/Service and Repair/Installation
5. INSTALL UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
6. INSTALL LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Installation
7. ADJUST SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
8. INSTALL STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Steering Wheel (w/
Steering Pad Switch)/Installation
9. INSPECT STEERING WHEEL CENTER POINT
10. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
11. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation