Corolla L4-2.4L (2AZ-FE) (2010)
Seat Occupant Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions
NOTICE:
When replacing the occupant classification ECU, perform registration See: Restraint Systems/Testing and Inspection/Programming and
Relearning/Registration
2. REMOVE FRONT SEAT ASSEMBLY RH
(a) Remove the front seat assembly RH.
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Manual Seat)/Removal
3. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the connector from the occupant classification ECU.
(b) Remove the 2 screws and occupant classification ECU.