Corolla L4-2.4L (2AZ-FE) (2010)
Neutral Safety Switch: Service and Repair
Removal
U250E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL
1. REMOVE ENGINE UNDER COVER LH
2. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Remove the nut and disconnect the control cable assembly from the control shaft lever.
(b) Remove the clip and disconnect the transmission control cable assembly from the control cable bracket.
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the park/neutral position switch connector.
(b) Remove the nut, washer and control shaft lever.
(c) Using a screwdriver, pry up the lock plate.
(d) Remove the lock nut and the lock plate.