Toyota Workshop Service and Repair Manuals

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(c) Connect the terminal 50 connector to the starter assembly.

3. INSTALL BATTERY CARRIER   See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Installation

4. INSTALL BATTERY   See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation

5. INSTALL WIRE HARNESS

(a) Install the claw and wire harness.

6. INSTALL AIR CLEANER CASE   See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine

Assembly/Installation

7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE   See: Powertrain Management/Fuel Delivery and Air Induction/Throttle

Body/Service and Repair/Installation

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY   See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine Assembly/Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

HINT
  See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation