Corolla L4-2.4L (2AZ-FE) (2010)
Steering Control Module: Service and Repair
Removal
POWER ASSIST SYSTEMS: POWER STEERING ECU (for 2AZ-FE): REMOVAL
1. PRECAUTION
HINT
See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service Precautions/Upper Instrument Panel
2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
HINT
See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper
Instrument Panel/Removal
4. REMOVE POWER STEERING ECU ASSEMBLY
(a) Separate the wire harness clamp from the power steering ECU assembly.
(b) Disconnect the connector from the power steering ECU assembly.
HINT
As shown in the illustration, pull out the lock of the lock lever and turn the lock lever to disconnect the connector.
(c) Disconnect the 3 connectors from the power steering ECU assembly.
(d) Remove the bolt, 2 nuts, and the power steering ECU assembly.