Corolla L4-2.4L (2AZ-FE) (2010)
Steering Control Module: Service and Repair
Installation
POWER ASSIST SYSTEMS: POWER STEERING ECU (for 2AZ-FE): INSTALLATION
1. PRECAUTION
HINT
See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service Precautions/Upper Instrument Panel
2. INSTALL POWER STEERING ECU ASSEMBLY
(a) Install the power steering ECU assembly with the bolt and 2 nuts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 3 connectors to the power steering ECU assembly.
(c) Connect the connector to the power steering ECU assembly.
HINT
As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the
lock lever.
(d) Install the wire harness clamp to the power steering ECU assembly.