Corolla L4-2.4L (2AZ-FE) (2010)
Axle Beam: Service and Repair
Installation
REAR SUSPENSION: REAR AXLE BEAM: INSTALLATION
1. INSTALL REAR AXLE CARRIER BUSHING LH
(a) Align the arrow mark on a new rear axle carrier bushing LH with the matchmark on the rear axle beam assembly and temporarily install the
rear axle carrier bushing LH to the rear axle beam assembly. (Perform this procedure when reusing the rear axle beam assembly.)
NOTICE:
Install the rear axle carrier bushing LH in the same direction as the removed bushing.
(b) Temporarily install a new rear axle carrier bushing LH to the position shown in the illustration. (Perform this procedure when replacing with a
new rear axle beam assembly.)
(A):
0°53' +/- 3° (0.88° +/- 3°)
NOTICE:
Install the rear axle carrier bushing LH in the same direction as the removed bushing.
(c) Using SST, install the rear axle carrier bushing LH to the rear axle beam assembly.
SST : 09710-04101
SST : 09950-40011
09951-04020
09952-04010
09953-04030