Corolla L4-2.4L (2AZ-FE) (2010)
9. REMOVE FRONT AXLE ASSEMBLY See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
10. REMOVE FRONT LOWER BALL JOINT
(a) Secure the front axle assembly in a vise.
NOTICE:
When using a vise, do not overtighten it.
(b) Remove the cotter pin and nut.
(c) Install SST to the front lower ball joint as shown in the illustration.
SST : 09960-20010
09961-02050
09961-02050
NOTICE:
Check that the clearance measurement between SST and the front axle assembly is 1 mm (0.04 in.).
(d) Using SST, remove the front lower ball joint from the front axle assembly as shown in the illustration.
SST : 09960-20010
09961-02010