Corolla L4-2.4L (2AZ-FE) (2010)
NOTICE:
Make sure that the front speed sensor is completely separated from the front shock absorber with coil spring.
18. SECURE FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Install the bolt and nut to the front shock absorber as shown in the illustration and secure the front shock absorber in a vise.
A:
28 mm (1.102 in.)
19. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using SST, compress the front coil spring.
SST : 09727-30021
09727-00010
09727-00021
09727-00031
HINT
If the front coil spring is compressed at an angle, using 2 SST will make the work easier.
(b) Check that the front coil spring is sufficiently compressed.