Corolla L4-2.4L (2AZ-FE) (2010)
14. REMOVE REAR AXLE HUB BOLT (for Rear Disc Brake)
(a) Temporarily install the 2 nuts and 2 washers to the rear axle hub bolt as shown in the illustration.
(b) Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
SST : 09628-10011
15. INSTALL REAR AXLE HUB BOLT (for Rear Drum Brake)
(a) Install a washer and nut to a new rear axle hub bolt as shown in the illustration.
(b) Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
16. INSTALL REAR AXLE HUB BOLT (for Rear Disc Brake)
(a) Install a washer and nut to a new rear axle hub bolt as shown in the illustration.
(b) Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
17. INSTALL REAR BRAKE DRUM (for Rear Drum Brake) See: Brakes and Traction Control/Drum Brake System/Service and Repair/Removal
and Replacement/Installation
18. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake) See: Brakes and Traction Control/Drum Brake System/Service
and Repair/Removal and Replacement/Installation