toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid - M/T|Capacity Specifications|Page 4396 > < Fluid - M/T|Capacity Specifications|Page 4394
Page 1
background image

Fluid - M/T: Testing and Inspection

E351 MANUAL TRANSMISSION / TRANSAXLE: MANUAL TRANSAXLE OIL: ON-VEHICLE INSPECTION

1. INSPECT TRANSAXLE OIL

(a) Stop the vehicle in a level place.

(b) Remove the transmission filler plug and the gasket.

(c) Check that the oil surface is within 5 mm (0.197 in.) of the bottom of the transmission filler plug opening.

NOTICE:
*

Excessively large or small amounts of oil may cause problems.

*

After replacing the oil, drive the vehicle and check the oil level again.

(d) Check for oil leakage when the oil level is low.

(e) Install the transmission filler plug and a new gasket.

Torque : 49 Nm (499 kgf-cm, 36 ft-lbf)

Fluid - M/T|Capacity Specifications|Page 4396 > < Fluid - M/T|Capacity Specifications|Page 4394