Corolla L4-2.4L (2AZ-FE) (2010)
NOTICE:
Do not remove the stopper. If it is removed, reinstall it to its original position.
(e) Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from
the shift lever retainer.
NOTICE:
Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable will not be reusable.
12. REMOVE SHIFT LEVER ASSEMBLY
(a) Remove the 4 bolts and the shift lever assembly.