Corolla L4-2.4L (2AZ-FE) (2010)
3. INSTALL BACK WINDOW GLASS ADHESIVE DAM
(a) Using a brush or sponge, coat the application area of the back window glass adhesive dam with Primer G.
Standard Dimension:
NOTICE:
*
Do not apply too much primer.
*
Allow the primer coating to dry for 3 minutes or more.
*
Throw away any leftover Primer G.
HINT
If an area other than that specified is coated by accident, apply a non-residue solvent to a clean cloth and wipe off the excess primer.
4. INSTALL NO. 1 BACK WINDOW MOULDING
(a) Using a brush or sponge, coat the application area of the No. 1 back window moulding with Primer G.