Corolla L4-2.4L (2AZ-FE) (2010)
Windshield: Service and Repair
Installation
WINDOW / GLASS: WINDSHIELD GLASS: INSTALLATION
1. INSTALL NO. 2 WINDSHIELD GLASS STOPPER
(a) Using a brush or sponge, coat the application area of the 2 No. 2 windshield glass stoppers with Primer G.
NOTICE:
*
Do not apply too much primer.
*
Allow the primer coating to dry for 3 minutes or more.
*
Throw away any leftover Primer G.
HINT
If an area other than that specified is coated by accident, apply a non-reusable part solvent to a clean cloth and wipe off the primer.
(b) Install 2 new No. 2 windshield glass stoppers onto the windshield glass as shown in the illustration.
HINT
Only 2-piece type No. 2 windshield glass stoppers are supplied. Use the 2-piece type stoppers even if a 1-piece type was used.
Standard Dimension:
2. INSTALL NO. 1 WINDSHIELD GLASS STOPPER (for 2-piece Type)
(a) Install 2 new No. 1 windshield glass stoppers to the vehicle body as shown in the illustration.
HINT
Only 2-piece type No. 1 windshield glass stoppers are supplied. Use the 2-piece type stoppers even if a 1-piece type was used.
3. INSTALL WINDSHIELD OUTSIDE MOULDING
(a) Using a brush or sponge, coat the application area of the windshield outside moulding with Primer G.