Corolla L4-2.4L (2AZ-FE) (2010)
Washer Fluid Level Switch: Service and Repair
Installation
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION
1. INSTALL LEVEL WARNING SWITCH ASSEMBLY
(a) Install the level warning switch assembly.
(b) Connect the connector.
2. FILL WASHER JAR WITH WASHER FLUID See: Windshield Washer Motor/Service and Repair/Installation
3. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
4. INSTALL NO. 4 ENGINE UNDER COVER (for 2AZ-FE) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. INSTALL RADIATOR GRILLE PROTECTOR See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) See: Lighting and Horns/Fog/Driving Lamp/Adjustments
7. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) See: Lighting and Horns/Fog/Driving Lamp/Adjustments
8. INSPECT FOG LIGHT AIMING (w/ Fog Light) See: Lighting and Horns/Fog/Driving Lamp/Adjustments
9. ADJUST FOG LIGHT AIMING (w/ Fog Light) See: Lighting and Horns/Fog/Driving Lamp/Adjustments