Corolla CE Sedan L4-1794cc 1.8L DOHC MFI (2001)
8. INSTALL INBOARD JOINT BOOT CLAMPS AND OUTBOARD JOINT SMALL BOOT CLAMP
a. Place new clamps to the proper positions.
b. Using pliers, pinch the claw A and B to compress the clamp and engage the claw C and C'.
9. ASSEMBLE OUTBOARD JOINT LARGE BOOT CLAMP
a. Secure the clamp onto the boot.
b. Place SST onto the clamp.
SST 09521-24010
c. Tighten the SST so that the clamp is pinched.
NOTICE: Do not overtighten the SST.
d. Using SST, adjust the clearance of the clamp.
SST 09240-00020
Clearance: 1.9 mm (0.075 inch) or less
10. RH drive shaft: ASSEMBLE DAMPER CLAMP
a. Make sure that the damper is on the shaft groove.
b. Set the distance, as described.
Distance: 431.3 - 3.0 mm (16.980 - 0.118 inch)
c. Secure the clamp onto the boot.
d. Place SST onto the clamp.
SST 09521-24010
e. Tighten the SST so that the clamp is pinched.
