toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Fluid Pump Relay > < ABS Light|Testing and Inspection|Page 4186
Page 3
background image

ABS Warning Light Circuit Inspection Procedure (Part 2 Of 2)

CIRCUIT DESCRIPTION 

If the ECU detects trouble, it lights the ABS Warning Light while at the same time prohibiting ABS control. At this time, the ECU records a DTC
in memory.
After removing the short pin of the DLC1, connect between terminals Tc and E1 of the DLC1 to make the ABS Warning Light blink and output
the DTC.

Troubleshooting in accordance with the chart for each trouble symptom.
ABS warning light does not light up. Go to step 1.
ABS warning light remains on. Go to step 3.

Brake Fluid Pump Relay > < ABS Light|Testing and Inspection|Page 4186