Corolla CE Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Brake Master Cylinder: Service and Repair
With ABS
Removing Master Cylinder
REMOVAL
1. Disconnect Level Warning Switch connector.
2. Take out fluid with syringe.
CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.
Disconnecting Brake Lines From Master Cylinder
3. Disconnect brake lines.
Using Special Service Tool (SST) # 09023-00100, disconnect the brake lines from the Master Cylinder.
Torque: 15 Nm (11 ft. lbs.)
4. Remove Master Cylinder.
Remove the 3 mounting nuts and pull out the Master Cylinder, 2-way and gasket.
Torque: 13 Nm (9 ft. lbs.)
