Corolla CE Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
3. Remove No. 2 and No. 3 timing belt covers.
4. Remove front engine mounting insulator as follows:
a. Remove the hole cover.
b. Remove the 2 bolts from the mounting.
c. Remove the nut, through-bolt and front engine mounting insulator.
5. Remove electric cooling fan.
6. Disconnect engine wire remove the bolt and 2 nuts, and disconnect the engine wire.
7. Remove water pump as follows:
a. Disconnect the crankshaft position sensor connector from the dipstick guide.
b. Remove the mounting bolt and pull out the dipstick guide and gauge.
c. Disconnect the water temperature sender gauge connector.
d. Remove the 2 nuts and No.2 water inlet from the water inlet hose.
e. Remove the 3 bolts and water pump.
CAUTION: Be careful not to get coolant on the timing belt.
INSTALLATION
1. Install water pump as follows:
a. Place a new O-ring on the block.
