Corolla CE Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Crankshaft Main Bearing: Specifications
DIMENSIONS
Center Wall Thickness (Reference)
Standard
Mark 1: 2.002-2.005 mm (0.0788-0.0789 inch)
Mark 2: 2.005-2.008 mm (0.0789-0.0791 inch)
Mark 3: 2.008-2.011 mm (0.0791-0.0792 inch)
Mark 4: 2.011-2.014 mm (0.0792-0.0793 inch)
Mark 5: 2.014-2.017 mm (0.0793-0.0794 inch)
TIGHTENING SPECIFICATIONS
Main Bearing Cap Bolts
Tighten uniformly the 10 bolts in several passes, in sequence shown. Than on final pass torque to 60 Nm (44 ft. lbs.).
