toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Timing Belt Tensioner > < Timing Belt Removal|Page 1708
Page 5
background image

b. Install the damper with the bolt.
c. Install the bracket with the bolt and screw.
d. Install the actuator bracket and ground wire with the 3 bolts.

14. Connect ground connector to ground wire on Rh fender apron.
15. Install and adjust PS drive belt.
16. Install A/C compressor mounting bracket.
17. Install A/C compressor.
18. Install and adjust A/C drive belt.
19. Install and adjust generator drive belt. Tighten the 4 water pump pulley bolts. Torque to 9.3 Nm (7 inch lbs.).
20. Install RH engine under cover.
21. Install RH front wheel.
22. Install cruise control actuator.
23. Install washer tank.

Timing Belt Tensioner > < Timing Belt Removal|Page 1708