toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Exhaust Manifold > < Catalytic Converter|Specifications|Page 1994
Page 1
background image

Catalytic Converter: Service and Repair

TWC REPLACEMENT 

1. REMOVE TWC

(a) Jack up the vehicle.
(b) Check that the converter is cool.
(c) Remove the 4 bolts, support bracket and 2 nuts at the front and rear of the converter.
(d) Remove the converter and 2 gaskets.

2. REINSTALL CONVERTER

(a) Install the converter and 2 new gaskets with the 4 bolts, 2 nuts and support bracket.
(b) Tighten the bolts and nuts.

Torque: 43 N.m (440 kgf.cm, 32 ft.lbf) 

Exhaust Manifold > < Catalytic Converter|Specifications|Page 1994