toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Starter Relay > < Brush Holder, Starter|Testing and Inspection
Page 1
background image

Starter Drive/Bendix: Testing and Inspection

Clutch and Gears

1. INSPECT GEAR TEETH

Check the gear teeth on the pinion gear, idler gear and clutch assembly for wear or damage.

If damaged, replace the gear or clutch assembly.

If damaged, also check the drive plate ring gear for wear or damage.

2. INSPECT CLUTCH

Rotate the pinion gear counterclockwise. and check that it turns freely. Try to rotate the pinion gear clockwise and check that it locks.

If necessary, replace the clutch assembly.

Starter Relay > < Brush Holder, Starter|Testing and Inspection