Corolla CE Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
5. Check fluid pressure reading with valve opened.
a. With the engine idling, open the valve fully.
b. Measure the fluid pressure at engine speeds of 1,000 rpm and 3,000 rpm.
Fluid Pressure Difference: 490 kPa (71 psi) or less.
CAUTION: Do not turn the steering wheel.
6. Check fluid pressure reading with steering wheel turned to full lock. With the engine idling and valve fully opened, turn the wheel to full lock.
Minimum Fluid Pressure: 6,374 kPa (924 psi).
NOTE:
^
Do not maintain lock position for more than 10 seconds.
^
Do not let the fluid temperature become too high.
7. Disconnect the SST, then connect the pressure feed tube.
8. Bleed power steering system. Refer to Power Steering Bleeding.
