Corolla CE Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
7. Remove outer oil seal, using SST 09308 - 00010, remove the outer oil seal.
8. Remove bearing from steering knuckle.
a. Install the inner race (outside) from the bearing.
b. Using SST 09527 - 17011, 09950 - 60010 (09951 - 00650), 09950-70010 (09951 -07150) and a press, remove the inner race (outside) with
bearing from the steering knuckle.
Assembly
1. Install bearing.
a. Remove the inner races from a new bearing.
b. Using Special Service Tool (SST) 09950 - 60020 (09951 - 00710), 09950-70010 (09951 - 07150) and a press, install the bearing to the
steering knuckle.
c. Install the inner races.
CAUTION: If the inner race and balls come loose from the bearing outer race, make sure to install them on the same aide as before.
2. Install outer oil seal.
a. Using SST 09316 - 60011 (09316 - 00011, 09316 - 00061), 09527 - 17011 and a hammer, install a new outer oil seal.
b. Apply MP grease to the oil seal lip.
3. Install brake dust cover, using a torx wrench (T30), install the 3 bolts.
[torque: 8.3 Nm (8574 inch lbs.)].
