toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Module HVAC > < Fan Relay Number 1
Page 1
background image

Condenser Fan Motor Relay: Testing and Inspection
Fan Relay Number 2

Condenser Fan 2 Relay Terminal ID

INSPECT RELAY CONTINUITY

No continuity should be between terminals 2 and 4. If not as specified, replace the relay.

INSPECT RELAY OPERATION

Apply battery voltage between terminals 3 and 1.  Continuity should then exist between terminals 2 and 4. If operation is not as specified, replace
the relay.

Control Module HVAC > < Fan Relay Number 1