Corolla FX L4-1839cc DSL (1CLC) (1986)
Engine Mount: All Technical Service Bulletins
Engine - Updated Mounts and Tightening Torque
REFERENCE ENGINES
NUMBER
007
DATE
10-11-85
MODEL COROLLA DIESEL (CE)
Engine Mount
To reduce body vibration during initial clutch engagement, the following changes have been made:
1.
The front engine mounting insulator has been changed from a sheer type to a cylindrical type.
2.
The thickness of the rear engine mounting bracket has been increased from 3.8 mm (0.15 in.) to 4.5 mm (0.18 in.).
3.
Due to these modifications, the tightening torque of the rear engine mounting insulator attaching bolts has been changed from 400 kg-cm (350
in.lbs.) to 490 kg-cm (425 in.lbs.).
NOTE:
If the front engine mounting insulator is replaced, the rear engine mounting bracket and insulator attaching bolts should also be
replaced.
PRODUCTION EFFECTIVE:
Applicable Models
Production Date
From VIN
CE82
March 1985
JT2CE82##F3010500
PART NUMBER INFORMATION:
Prev. Part No.
New Part No.
Part Name
12361-64031
12361-64100*
Insulator, Engine Mounting, Front
12311-63031
12311-64070*
Bracket, Engine Mounting, Front
91621-61020
90105-12054*
Bolt (Bracket)
-
90179-12016* Nut (Bracket)
91652-61025
90119-10358*
Bolt (Insulator Attaching)
12321-63031
12321-64100*
Bracket, Engine Mounting, Rear
91652-61025
90119-10358*
Bolt (Insulator Attaching)