Corolla FX L4-1839cc DSL (1CLC) (1986)
/Page-134001.png)
Oil Pan: Service and Repair
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Remove engine under cover.
4.
Drain oil from engine.
5.
Using a suitable hoist, raise engine slightly.
6.
Remove drive belt and pulley.
7.
Remove power steering pump, if equipped and position aside.
8.
Remove No. 2 timing belt cover.
9.
Position No. 1 cylinder to TDC of compression stroke.
10.
Remove crankshaft pulley.
11.
Remove No. 1 timing belt cover and belt guide.
12.
Remove right engine mount and bracket assembly.
13.
Remove timing belt.
14.
Remove No. 2 idler pulley and crankshaft timing sprocket.
15.
Remove oil pan attaching bolts, then the pan.
16.
Remove oil pump assembly.
17.
Reverse procedure to install.
