Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
Low Fuel Lamp/Indicator: Testing and Inspection
INSPECT FUEL LEVEL WARNING LIGHT
a. Disconnect the connector from the sender gauge.
b. Connect terminals 1 and 3 on the wire harness side connector.
c. Turn the ignition switch ON, check that the warning light lights up.
HINT: If the warning light does not light up, test the bulb or inspect wire harness.
INSPECT FUEL LEVEL WARNING SWITCH
a. Apply battery positive voltage between terminals 1 and 3 through a 3.4 Wtest bulb, check that the bulb lights up.
HINT: It takes a short time for the bulb to light up.
b. Submerge the switch in fuel, check that the bulb goes out.
If operation is not as specified, replace the sender gauge.