Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-1937002.png)
Disconnect the connector from the sensor and inspect the connector on the wire harness side, as shown in the chart.
If circuit is as specified, perform the inspection.
if the circuit is not as specified, inspect the circuit connected to other parts.
Connect the wire harness side connector to the sensor
and inspect wire harness side connector from the back side.
HINT:
-
Ignition switch ON.
-
Light control switch AUTO.
-
Vehicle's surroundings are bright.
If circuit is as specified, try replacing the sensor with a new one.
If the circuit is not as specified, inspect the circuit connected to other parts.
