Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-338003.png)
HINT:
^
Try to adjust the camber to the center of the specified value.
^
Adjusting value for the set bolts is 6'- 30' (0.1 0.50). If the camber is not within the specified value, using the following table, estimate how
much additional camber adjustment will be required, and select the camber adjusting bolt.
i.
Do the steps mentioned above again. Between step b. and c., replace 1 or 2 selected bolts.
HINT: When replacing the 2 bolts, replace 1 bolt for each time.
5. INSPECT TOE-IN
Toe-in:
If the toe-in is not within the specified value, adjust it at the rack ends.
6. ADJUST TOE-IN
Measuring Point Reference
a. Remove the rack boot set clips.
