toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

MIL ON - DTC P0446 (EVAP Vent)|Page 2360 > < Electrical - SRS And HV Wiring Repairs
Page 1
background image

Engine Control Module: All Technical Service Bulletins
MIL ON - DTC P0446 (EVAP Vent)

ENGINE
EG005-99

Title:
DIAGNOSTIC TROUBLE CODE P0446

Models:
'99 Corolla

May 14, 1999

Introduction

Under certain driving conditions, some 1999 Model Year Corollas will exhibit a false M.I.L. "ON" DTC P0446. A revised ECM has been developed to
prevent this condition.

Production Change Information

Parts Information

Repair Procedure

1.

Verify that the Purge System is operating as specified in the Repair Manual.

2.

Check the Part Number of the ECM currently in the vehicle.

3.

If the ECM Part Number ends in a "0", replace the ECM with a revised ECM.

NOTE:

Refer to the Part Number Information Table, to determine the proper revised ECM Part Number.

4.

After replacing the ECM, verify that the Gas Cap is on securely.

Warranty Information

Applicable Warranty*:

MIL ON - DTC P0446 (EVAP Vent)|Page 2360 > < Electrical - SRS And HV Wiring Repairs