Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-1581005.png)
c. Securely fix the side airbag wire harness to the seat cushion with the wire harness protector.
3. INSTALL INNER FRONT SEAT CUSHION SHIELD
4. INSTALL FRONT SEAT CUSHION SHIELD
5. RECLINING ADJUSTER RELEASE HANDLE
6. INSTALL HEADREST
7. INSTALL FRONT SEAT
a. Slide the front seat to the most front position.
NOTE: Make sure that seat adjuster locks.
b. Without holding the seat track handle, mount the seat to the vehicle.
HINT: If holding the seat track handle, the adjusted most front positions slip off.
c. Connect the side airbag connector.
d. Tighten the bolts on the rear side temporarily, starting from the bolt on the inner side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
e. Slide the seat to the rearmost position to install the bolts on the front side.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
